Running A Method Or A Sequence From The Keypad - Agilent Technologies 7890A Operating Manual

Agilent 7890A Gas Chromatograph
Operating Guide
3
Running a Method or a Sequence from
the Keypad
Loading, Storing, and Running Methods from the Keypad 32
Loading, Storing, and Running Sequences from the Keypad 34
This section explains how to load, store, and run a method
or sequence using the GC keypad, without the use of an
Agilent data system. The keypad can be used to select and
run a method or automated sequence stored in the GC and
run it. In this case, the data generated from the run is
normally sent to an integrator for the data analysis report.
For information on creating a method or sequence using
keypad entry, see the Advanced User Guide.
Agilent Technologies
31