Power Management Setup - ECS N2U400-A Manual

Power Management Setup

The Power Management Setup Menu option is used to change the values of
the chipset registers for system power management.
Power Management
This category allows you to select the type (or degree) of power saving mode
settings.
Min Saving Minimum power management. Suspend Mode=1 hr.
Max Saving Maximum power management.Suspend Mode=1 min.
User Define Allows you to set each mode individually.
Suspend Mode= Disabled or 1 min ~1 hr.
HDD Power Down (Disabled)
The IDE hard drive will spin down if it is not accessed within a specified length
of time.
Soft-Off by PBTN (Instant-Off)
Pressing the power button for more than 4 seconds forces the system to enter
the Soft-Off state when the system has "hang".
PCIPME Power Up Control (Enabled)
Use this item to enable PCI activity to wakeup the system from a power sav-
ing mode.
Modem Ring Power up Contl (Disabled)
Use this item to enable the modem ring to wakeup the system from a power
saving mode.
Power-On by Alarm (Disabled)
When set to Enabled, the following three fields become available and you can
set the hour, minute and second to turn on your system.
35