Barrel Removal - Graco PRO Auto Xs Series Instructions-Parts List Manual

Repair

Barrel Removal

1. Prepare the gun for service, page 32.
2. Remove the air cap, page 34. Remove the gun
shroud (2).
3. Carefully loosen the fluid fitting nut (20). Pull the
tube (19) out of the fitting (23). Make sure both fer-
rules (21, 22) and the nut stay with the tube.
4. Remove the jam nut (28) and actuator arm (29). See
page 38.
5. Loosen the three screws (10, 33). See F
CAUTION
To avoid damaging the power supply (12), pull the
gun barrel (9) straight away from the gun body (32). If
necessary, gently move the gun barrel from side to
side to free it from the gun body.
Fig. 29. Disconnect Fluid Tube
40
6. Hold the gun body (32) with one hand and pull the
28.
IGURE
Fig. 28. Barrel Removal
9
29
30
28
barrel (9) straight off the body. See F
33
32
TI1709A
19 20 23
28.
IGURE
9
10
32
TI1563A
309297K