Removing The Gear Box Assembly - Pentair Fleck 7000 NXT Service Manual

WATER CONDITIONER FLOW DIAGRAMS
continued
Brine Tank Refill Position
26 • FLECK 7000 NXT Service Manual

REMOVING THE GEAR BOX ASSEMBLY

40988 Rev A
1. Unplug the power source.
2. With a 3/8" nut driver, turn the cycle cam counter-clockwise
to the position shown in the illustration above.
3. Remove brine cam if equipped.
41121 Rev A
4. Slightly pull the two tabs outward and push the gearbox
slightly upward to remove.
5. When returning the valve to service after powerhead
disassembly, manually step valve through regeneration
using the Extra Cycle button until the valve is In Service.
42554 Rev A
40988 Rev A
Figure 7