Brother DSmobile DS-635 Online User's Manual page 87

Home > Network > Advanced Network Features
Based Management > Configure the SNTP Protocol Using Web Based Management
Configure the SNTP Protocol Using Web Based Management
Related Models: DSmobile DS-940DW
Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by
the SNTP time server.
This feature is not available in some countries.
1. Start your web browser.
2. Do one of the following:
• When using Wireless Direct
Type "https://192.168.118.1" in your browser's address bar.
• When using infrastructure mode
Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
If the machine prompts you for a password, type it, and then click
own password, type the default login password. The default password for managing machine settings is
either:
• the password located on the bottom of the machine and marked "Pwd".
• initpass
3. Click the Network tab.
4. Click the Protocol menu in the left navigation bar.
5. Select the SNTP check box to activate the settings.
6. Restart your Brother machine to activate the configuration.
7. Next to the SNTP check box, click Advanced Setting and configure your settings as needed.
> Synchronize Time with the SNTP Server Using Web
. If you have not previously set your
84