Error LED SD Card
LED
(blinking
(blinking
slowly)
rapidly)
(blinking
rapidly)
Related Information
•
Troubleshooting
•
Service Call Indications
Related Topics:
•
Document Jam
•
Brother iPrint&Scan for Windows and Mac
•
Brother Help and Customer Support
Wi-Fi LED Battery
LED
Power/
Machine Status
Scan LED
Unsupported Memory Card
An unsupported memory card is inserted into the
Memory Card Slot.
•
Remove the memory card and insert the supported
microSD memory card.
•
Format the microSD memory card on the computer.
Too Many Files on the Memory Card
Your machine cannot save files to a memory card if the
card contains too many files.
Press START/STOP to clear the error. Remove the
microSD memory card, and then do one of the
following:
•
Delete unused files or folders from the microSD
memory card, and then try again.
•
Use a microSD memory card that has available
space.
Battery Error
Battery error has occurred.
•
The internal temperature of the machine or of its
battery is too high or too low. Wait until the
temperature returns to normal and the LED stops
flashing.
•
Turn off the machine, and then turn it on again. If it
is not restored, contact your Brother dealer or
Brother Customer Service.
•
Connect the USB cable to your scanner and your
computer to use the scanner. Make sure the USB
cable is securely connected.
•
If the error cannot be cleared, contact your local
Brother office.
See Related Information: Brother Help and
Customer Support.
104