Table of Contents
Advertisement
Adjusting the color convergence
(continued)
7. If both red and blue need adjusting, you will need to
perfrom steps 5 and 6 twice.
8. Press ENTER to display the cursor.
9. Repeat steps 4 to 8 to adjust another position.
10. Press EXIT to close the Convergence menu.
To reset your convergence adjustments:
1. Press MENU and open the SETUP menu.
2. Highlight CONVERGENCE and press ENTER.
3. Press RECALL.
The message, "WARNING: RESETS USER
ADJUSTMENT TO FACTORY SETTINGS" appears.
4. Press ENTER to reset your convergence adjustments to the
factory settings.
50
51,57HX94(E)044-52
50
Chapter 6: Setting up your TV
Setting the AVHD device skip time
When you connect an external AVHD device, such as the
Toshiba Symbio
one of the TV's IEEE-1394 ports, you can use this feature to set
the number of minutes the device will skip forward or backward
when you press the SKIP buttons.
Note:
• This TV will work best with the Toshiba Symbio™ 160HD4 AVHD,
for recording high definition and standard definition material from
either tuner and for controlling live TV (pause/rewind/fast
forward/skip). When the AVHD is connected to the TV, the
remote control keys (STOP, REW, PAUSE, PLAY, FF) are
automatically activated to allow pausing of live TV.
• When you connect an AVHD (or a D-VHS) device, the
TV Guide On Screen system is automatically configured
to allow recording.
See page 23 for device connection information.
See Chapters 5 and 7 for details about setting up
and using the TV Guide On Screen system.
To set the AVHD device skip time:
1. Press MENU and open the
SETUP menu.
2. Highlight AVHD SKIP
TIME and press ENTER.
3. Press z or y to select the
AVHD skip time and press
ENTER.
Selecting the HDMI
To select the HDMI audio mode:
1. Press MENU and open the SET UP menu.
2. Highlight HDMI AUDIO
SELECTION and press
ENTER.
3. Press z or y to select
which HDMI device for
which you want to select
audio and press ENTER.
4. Press z or y to select the
HDMI audio mode from Auto, Digital, or Analog (Auto is
recommended). See "Connecting an HDMI or a DVI
device to the HDMI input on page 19.
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
™
160HD4 AVHD (audio/video hard drive) to
Setup
Installation
Sleep Timer
On/Off Timer
HDMI Audio Selection
Side Show Interval
AVHD Skip Time
Convergence
Navigate
Select
™
1 or HDMI 2 audio mode
9/12/04, 7:11 PM
1 min
3 min
5 min
15 min
2 Sec
15 min
DVD RTN
Back
Exit
CH RTN
EXIT
Hide quick links:
Advertisement
Table of Contents
