Using The Theaternet Control Icons - Toshiba TheaterWide 51HX94 Owner's Manual

Setting up and using TheaterNet

Using the TheaterNet control icons

1. Set up your infrared devices in TheaterNet, if you have not
already done so (see page 44).
Note: IEEE-1394 devices do not need to be set up in
TheaterNet because they appear automatically in the
TheaterNet menu (as shown in step 3 below).
2. Press DEVICE on the remote control to display the device
control selection screen.
+10
–
ACTION 100
MENU
ENTER
3. Using the yzx • buttons, highlight the device you want
to control and press ENTER.
TheaterNet
0
Video 1
Brandname
2
Video 3
Brandname
4
ColorStream HD2
Brandname
4. The input automatically changes to the input for the
selected device and the device's control icons display.
Highlight the icon for the function you want to control
and press ENTER.
To select the device's control icons directly:
Press CTRL.
To close the on-screen control icons:
Press EXIT.
To view another source:
Press DEVICE and select the input source you want to
view.
51,57HX94(E)044-52 45
Chapter 6: Setting up your TV
™
on-screen device control
DEVICE
CTRL
1 1394
IEEE-1394 DVHS
3
ColorStream HD1
Toshiba
5
Video 2
Toshiba
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
(continued)
The following are examples of the TheaterNet on-screen control icons
for other types of devices.
Toshiba Symbio™ AVHD device control
DVD
VCR
Cable
SAT
Audio Receiver
MUTE
VOL
INPUT
9/12/04, 7:10 PM
45