SELECTING AUDITING MODE SETTINGS
1
Hold down the [Light] key (
the alarm indicators ( ,
blink.
2
Enter the program number with the
numeric keys.
If you enter the wrong number, press the
Note
[CLEAR] key (
correct number.
3
Press the [START] key (
4
Enter the desired setting code for the
program as explained in the detailed
procedures on the following pages.
For the setting codes, see "AUDITING MODE
SETTINGS" (p.36).
If you enter the wrong number, press the
Note
[CLEAR] key (
If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key (
and return to step 2.
5
Press the [Light] key (
complete the settings.
The alarm indicators (
and the display returns to the number of copies
display.
) until
,
,
,
)
The display shows "- -"
with the left hyphen
blinking.
See "AUDITING MODE
•
SETTINGS" (p.36) for
the program numbers.
The selected program
•
number blinks.
For example, to select
•
"Auditing mode", enter
"10".
) and then enter the
).
The selected program
•
number stops blinking
and lights steadily.
The currently selected
•
setting code blinks on
the right side of the
display.
) and return to step 2.
)
) to
,
,
,
,
) go off
USER SETTINGS
4
37