Operation Panel - Toshiba e-STUDIO161 Operator's Manual

BEFORE USING THE MACHINE

OPERATION PANEL

AUDIT CLEAR key (
Closes an open account. (p.39)
INTERRUPT key (
Interrupts a copy run. (p.28)
ORIGINAL SIZE ENTER key (
SIZE indicators
Use to enter the original size. (p.16) The selected
original size will light up.
AUTO PAPER SELECT indicator (
Paper of the proper size will be automatically
selected depending on the original size and
selected copy ratio when this indicator is on. (p.20)
PAPER SIZE ENTER key (
Use to set the paper size in the paper trays. (p.16)
Alarm indicators
[ ]Maintenance indicator (p.46)
[ ]Toner cartridge replacement required
indicator (p.46)
[ ]Developer replacement required indicator
(p.46)
[ ]Paper required indicator (p.46)
[ ]Misfeed indicator (p.46)
ADF indicator (when the ADF is installed)
Lights up when originals are set in the document
feeder tray. (p.19)
XY-ZOOM key (
Press to change the horizontal and vertical copy
ratios independently. (p.24)
DUAL PAGE COPY key (
Use to make individual copies of the two pages of
an open book or other two-page original. (p.27)
10
)
) / indicator
) / ORIGINAL
)
)
) / indicator
) / indicator
ZOOM indicator
Lights up when a zoom ratio is set. (p.24)
POWER SAVE indicator (
Lights up when the machine is in a power save
mode. (p.12)
Display
Shows the set number of copies, as well as the
copy ratio, user program function or setting code,
or an error code when an error occurs.
Copy ratio display key (
Hold down when the machine is not in use to
display the copy ratio in the display. (p.24)
Zoom keys ( , )
Use to select any reduction or enlargement copy
ratio from 25% to 400% in increments of 1%.
(p.24)
Numeric keys
Use to select the desired copy quantity or to make
user program entries. (p.22)
To display the total number of pages output by the
machine, hold the [0] key down. (p.55)
)
)