Table of Contents
Advertisement
8. Operation
CAUTION
This section will describe the basic procedures used to operate the UPS.
NOTES
Operators should be qualified* personnel.
Operation of the UPS by unqualified or untrained personnel may
result in electric shock, injury or failure.
*
In accordance with customer stipulations
Make sure you understand the meaning of the warning labels
on the equipment, and follow the precautions indicated.
Operating the equipment with an inadequate understanding of
these matters may result in electric shock or burns.
See Page 6 for the location of these warning labels.
Operate the unit within the ambient conditions noted in the
specifications.
Operating the unit outside these ranges may result in failure.
During operation, do not turn off the air conditioner for the UPS
chamber and the battery chamber.
This will cause the temperature in these chambers to rise and
may result in failure.
When starting or stopping the equipment, monitor the
operation on the graphic display panel LCD and follow the
procedures.
Do not leave the unit for long periods of time (1 week) with
control power source switch (8A) in the OFF position.
This can cause the backup capacitor on the control board to
become discharged and result in incorrect time display and other
problems.
- 25 -
6 F 3 H 1 0 0 1
Advertisement
Table of Contents
