Epson FX Series Product Support page 131

GENERAL
TABLE 6-10. Functions and Conditions of DIP Switch No. 1 (MX-80/MX-100)
SW
Function OFF
ON Factory Set
Condition
1-1
Line spacing 1/6"
1/8" OFF
1-2
Form Length
i r 12" OFF
1-3 Character size and
number of characters per
line
Tahlof^.n
OFF
1-4
1-5 Never Set this switch to on
OFF
1-6
Paper End detector Valid Invalid OFF
1-7 International Char.Set
See Table 6-13 ON
1-B
SLCI IN signal
Not fixed - Host Fixed-Printer
ON
Notes:
1. When the paper end detector isinvalid, printing will continue after the
paper supply isdepleted. Transmission of the control code "ESC 9" will
reactivate the sensor, provided the external computer is selected via
switch 1-8.
2. Setting switch 1-8to OFF will permit the printer to be controlled by the
host computer.
t ' -
'1 .-I
6-10
EPSON PRINTERS
TABLE 6-11. Character Size and Maximum Column Length
CHARACTER SIZE
PIN NUMBER MAXIMUM COLUMN
SW1-3 SW1-4
LENGTH
Standard OFF OFF 136
Condensed OFF
ON 233
Emphasized
ON ON 136
Selection of the enlarged printing mode, in conjunction with any of the
above character types, reduces the column length by half.
TABLE 6-12. Functions and Conditions of DIP Switch No. 2 (MX-80/MX-100)
SW
Function OFF
ON
Factory Set
Condition
2-1
2-2
International
See note 3
character set
See Table 6-13
SeeTable 5-13
ON
2-3
AUlUhthUXi signal
See Note 4
Not Fixed Fixed OFF
2-4
Lower margin
designation - See note 5
Valid Invalid
ON