List Of Commands - Roland VR-50HD MK II Reference Manual

LAN/RS-232C Command Reference

List of Commands

* When sending a sequence of commands to this unit from a controller, after each one, be sure to verify that an "ACK" response is returned before
sending the next command.
Item
Select video input
Select transition effect
Set video transition time
Set the [PinP] button on/off
Set the [PinP/KEY] button on/off
Set the [STILL KEY] button on/off
Set the [OUTPUT FADE] button on/off
Set the [FREEZE/USER LOGO] button on/off
Adjust volume of audio channel 1
Adjust volume of audio channel 2
Adjust volume of audio channel 3
Adjust volume of audio channel 4
Adjust volume of audio channels 5/6
Adjust volume of audio channels 7/8
Adjust volume of audio channels 9/10
Adjust volume of audio channels 11/12
Adjust volume of main output
Recall memory
Select video for AUX bus
Select source video for video input
Select still image of the [STILL] button
Select source video for PinP
Select source video for PinP/KEY
Select source image for STILL KEY
Recall preset memory on remote camera
Acquire status of the VIDEO INPUT SELECT
buttons
Enable spontaneously sending status of the
VIDEO INPUT SELECT buttons
Reset USB connection
Acquire status of USB streaming
Acquire status of the unit
Version information
58
Sent Response
Parameter
command command
stxPGM:a; ack a: 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4), 4 (STILL)
stxTRS:a; ack a: 0 (CUT), 1 (MIX), 2 (WIPE)
stxTIM:a; ack a: 0–40 (0.0–4.0 sec)
stxPIP:a; ack a: 0 (OFF), 1 (ON)
stxPKY:a; ack a: 0 (OFF), 1 (ON)
stxSKY:a; ack a: 0 (OFF), 1 (ON)
stxFDE:a; ack a: 0 (OFF), 1 (ON)
stxULF:a; ack a: 0 (OFF), 1 (ON)
stxLM1:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLM2:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLM3:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLM4:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLS1:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLS2:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLS3:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLS4:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxLMN:a; ack a: 0 (-Inf dB)–127 (+10 dB)
stxMEM:a; ack a: 0 (Memory 1)–7 (Memory 8)
stxAUX:a; ack a: 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4), 4 (STILL), 4 (PinP)
stxVIS:a,b; ack a: 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3) , 3 (INPUT 4), 4 (STILL)
b: 0 (SDI), 1 (HDMI), 2 (COMPOSITE), 3 (RGB/COMPONENT)
* When a=2 (INPUT 3) or 3 (INPUT 4), you can select 0 (SDI) and 1 (HDMI) only.
stxSTS:a; ack a: 0 (STILL 1), 1 (STILL 2), 2 (STILL 3), 3 (STILL 4)
stxPIS:a; ack a: 0 (SDI 1), 1 (SDI 2), 2 (SDI 3), 3 (SDI 4), 4 (HDMI 1), 5 (HDMI 2), 6 (HDMI 3)
stxPKS:a; ack a: 0 (SDI 1), 1 (SDI 2), 2 (SDI 3), 3 (SDI 4), 4 (HDMI 1), 5 (HDMI 2), 6 (HDMI 3)
stxSKS:a; ack a: 0 (STILL 1), 1 (STILL 2), 2 (STILL 3), 3 (STILL 4)
stxCML:a,b; ack a: 0 (CAMERA 1)–5 (CAMERA 6)
b: 0 (Memory 1)–7 (Memory 8)
stxQPG; stxQPG:a; a: 0 (INPUT 1), 1 (INPUT 2), 2 (INPUT 3), 3 (INPUT 4), 4 (STILL)
stxCPG:a; ack a: 0 (OFF), 1 (ON)
stxUVR; ack
stxUVQ; stxUVS:a,b; a: 0 (unconnected), 1 (USB 2.0), 2 (USB 3.0)
b: Number of dropped frames
stxACS; ack
stxVER; stxVER:a,b; a: VR-50HDMK2
b: Version number
5 (PinP/KEY), 6 (PGM)
7 (HDM 4), 8 (COMPOSITE 1), 9 (COMPOSITE 2), 10 (RGB/COMPONENT 1)
11 (RGB/COMPONENT 2)
7 (HDM 4), 8 (COMPOSITE 1), 9 (COMPOSITE 2), 10 (RGB/COMPONENT 1)
11 (RGB/COMPONENT 2)
Product name
The version info is ASCII text strings.