Setup Screen - Roland VR-50HD MK II Reference Manual

Menu List

Setup Screen

([MENU] button0<
Here you can make system-related settings.
Menu item Value
(bold text: default value)
HDCP OFF, ON
NTSC Setup 0IRE, 7.5IRE
Frame Rate 59.94Hz, 50Hz
Field Sync ON
OFF,
Reference
Specifies the reference clock.
Internal
Reference
SDI 1
Clock Adj.
-1920–0– +1920
Line Adj.
-1080–0– +1080
Panel Lock
Enables or disables locking of the operating panel. When the operating panel is locked, the [MENU] button is lit.
OFF
Panel Lock
Part
All
232C
232C ON
OFF,
Rate 38400
9600,
Output Fade
Color Black, White
Touch Panel
Label
—
ON
Video Input Select OFF,
Mat Transparency 0–2–7
Dimmer 0–7
Version
—
Factory Reset
—
Label screen
Menu item Value
(bold text: default value)
MULTI-VIEW Label OFF, ON
54
>0System <Setup>)
Explanation
Specifies whether HDCP is enabled (ON) or disabled (OFF). When set to "ON, " copyright-protected (HDCP)
video can be input. HDCP is also added to the video that is output.
Specifies the NTSC setup level.
Specifies the frame rate.
If this is "ON, " the fields are automatically matched between input and output of the interlaced signal.
* This improves the image quality, but there will be more delay between input and output.
Specifies the reference clock as the internal clock of the unit.
Specifies the reference clock as the signal that is input from the SDI IN 1 connector. The VSYNC (vertical
synchronization signal) that is output by this unit will synchronize to the VSYNC being input via SDI.
Adjusts the horizontal phase when "Reference" is "SDI 1. "
Adjust this if the output is horizontally skewed in comparison to another device that is operating on the
same clock.
Adjusts the vertical phase when "Reference" is "SDI 1. "
Adjust this if the output is vertically skewed in comparison to another device that is operating on the
same clock, or if the field is skewed.
Unlocks the operating panel.
Buttons and knobs other than the following are locked.
5 Unaffected by panel lock: [MENU] [EXIT], [ENTER] buttons, VIDEO INPUT SELECT [1]–[STILL] buttons
[VALUE] [PHONES] knobs, faders, touch panel
Buttons, knobs, and faders other than the following are locked.
5 Unaffected by panel lock: [MENU] [EXIT] [ENTER] buttons, [VALUE] [PHONES] knobs, touch panel
If this is "ON, " RS-232C commands can be transmitted and received.
Specifies the communication speed (bps) of the RS-232C connector.
Specifies the background color (black, white) used when fading-in/out the program output video.
Displays the Label screen (p. 54). You can rename the input/output video and still image labels (up to
eight characters) that are shown in the monitor.
If this is "ON, " video switching by touching the monitor is enabled.
Adjusts the degree of transparency for the background of the menu screen.
Adjusts the brightness when the buttons or indicators are lit.
* Even with a setting of "0, " the buttons and indicators do not go completely dark.
Displays the version of the system program.
Returns the unit to its factory defaults.
Explanation
If this is "ON, " labels and tally border are shown in the multi-view that is output from the MULTI-VIEW
connector.