Video Follows Audio Screen; Reverb/Delay Screen - Roland VR-50HD MK II Reference Manual

Menu List

Video Follows Audio Screen

Here you can make settings for the Video Follows Audio function.
Menu item Value
(bold text: default value)
Video Follows
OFF, ON
Audio
Target
MIC 1–5, 7 (*8) OFF, INPUT 1–4, STILL
Threshold
MIC 1–5, 7 (*8) -50– -16–0dB
Mix OFF, Input 1–4, Still
Silent OFF, Input 1–4, Still
Time 0–4 0–30.0sec
(*8) The "MIC 5" and "MIC 7" settings are valid only when the Audio Ch. 5/6 or 7/8 screen (p. 39) "Input" setting is "MIC. "

Reverb/Delay Screen

Here you can make settings for reverb and delay.
Menu item Value
(bold text: default value)
Reverb Adds reverberation to the sound.
OFF, ON
Reverb
Level 0–127
Time 0.1–1 0–5.0sec
ROOM, STUDIO1, STUDIO2
Type
HALL 1–3, PLATE
AUX1 OFF, ON
Return
AUX2 OFF, ON
Delay
Compensates for timing discrepancies between the video and audio.
Main 0 0–500.0ms
AUX 1 0 0–500.0ms
AUX 2 0 0–500.0ms
44
([MENU] button 0 Audio <Video Follows Audio>)
Explanation
Turns the Video Follows Audio function on/off. "Video follows audio" is a function that detects audio
input from the mics, and switches to the desired video according to the volume.
* If this function is on, the Audio Follow function (p. 27) automatically turns off and cannot be set.
Specifies the video that is output when audio is detected.
Specifies the reference level at which the Video Follows Audio function operates. When audio that
exceeds this threshold is detected, the video is switched.
Specifies the video that is output when audio is detected in multiple mics. If this is "OFF, " video is
switched in the order in which audio is detected.
Specifies the video that is output when there is no audio input from any mic. If this is "OFF, " the last-
selected video continues to be output.
Specifies the time after the video has switched until audio detection resumes.
([MENU] button0Audio <Reverb/Delay>)
Explanation
Turns reverb on/off.
Specifies the amount of sound that is returned from the reverb (return level). This adjusts the depth
of the overall reverb.
Specifies the time until the reverberation is no longer heard.
Specifies the reverb type.
If this is "ON, " the audio from the reverb is returned to the AUX 1 bus.
If this is "ON, " the audio from the reverb is returned to the AUX 2 bus.
Adjusts the delay time of the main output audio.
Adjusts the delay time of the AUX 1 bus audio.
Adjusts the delay time of the AUX 2 bus audio.