Network
LAN Screen
([MENU] button0<
Here you can make network-related settings.
Menu item
Value
(bold text: default value)
Status
—
IP Address
—
MAC Address
—
Subnet Mask
—
—
Menu item
Config
Setup
IP Address (*17)
Subnet Mask (*17)
(*17) This is valid if "Config" is "MANUAL. "
Camera Screen
([MENU] button0<
Here you can make settings related to remote control of the cameras.
Menu item
Value
(bold text: default value)
Camera
1–6
Specifies how presets are recalled.
All Camera Recall
OFF
ON
Store
—
Camera Preset
1–8
Setup
—
Positioner
Adjust the horizontal/vertical position of the camera.
—
—
—
—
Speed
1–12–24
Zoom
Adjusts the camera's zoom position.
Wide
—
Fast
Tele
—
Wide
—
Slow
Tele
—
Reset
—
Focus
Adjusts the focal point of the camera.
Near
—
Far
—
Auto
—
Exposure
Auto
—
TALLY
Ch
1–4
>0Network <LAN>)
Explanation
Displays the connection status.
Displays the IP address.
Displays the MAC address.
Displays the subnet mask.
Accesses the LAN setup screen.
Value
Explanation
Specifies whether the IP address and subnet mask are obtained automatically (DHCP)
MANUAL,
DHCP
or set manually (MANUAL).
192 168 2 1
Specifies the IP address as appropriate for the network to which the unit is connected.
Specifies the subnet mask as appropriate for the network to which the unit is
255 255 255 0
connected.
>0Network <Camera Control>)
Explanation
Selects the camera to be controlled.
Recall presets from the camera that is being controlled.
Simultaneously recall presets from all cameras (CAMERA 1–6).
Stores the camera settings to a preset. Touch <Store> to make it light red, and then touch a "Camera
Preset" number to register the settings in a preset.
* Presets are saved in the camera itself.
Recall presets.
Displays the Camera Setup screen (p. 56).
While you touch the item, the camera faces left.
While you touch the item, the camera faces right.
While you touch the item, the camera faces up.
While you touch the item, the camera faces down.
Adjusts the speed at which the camera changes direction.
While you touch the item, the camera zooms-out at high speed.
While you touch the item, the camera zooms-in at high speed.
While you touch the item, the camera zooms-out at low speed.
While you touch the item, the camera zooms-in at low speed.
Resets the zoom position.
While you touch the item, the focus moves closer.
While you touch the item, the focal point moves farther away.
If this is "ON, " the focal point is set automatically.
Specifies the exposure mode (auto/manual). If this is on, auto mode is enabled.
Specifies the number of the video input to which the camera's video is being input. When the camera
video from this unit is the program output, the camera's tally light is lit.
Menu List
55