Alerts: Warnings And Other Messages; Figure 2-12. Viewing Active Alerts Page - Teledyne N500 User Manual

A : W O M
LERTS ARNINGS AND THER ESSAGES
Because internal temperatures and other conditions may be outside the specified limits
during the warm-up period, the software will suppress most Alerts for 45 minutes after
power up. The Alerts page (Figure 2-12) shows the status of any active warning
conditions or user-configured Events. (Section 2.4.3 provides more detailed information
about Alerts, and Section 2.5.2 addresses Events).
Alerts can be viewed and cleared via either the Alerts menu or the Alerts shortcut
(Caution symbol, bottom right corner of the screen). Although these alerts can be cleared
from the Active Alerts page, a history of all alerts remains in the Utilities>Alerts Log
page.

Figure 2-12. Viewing Active Alerts Page

If Alerts about warning conditions persist after the warm up period or after being cleared,
investigate their cause using the troubleshooting guidelines in Section 5.7.1.
Teledyne API N500 CAPS NO Analyzer with NumaView™ Software 29
089770000 Rev 05
X