Led Indicators; Front Panel - Toshiba ICC Multiprotocol Ethernet Interface ASD-G9ETH User Manual

ICC

6. LED Indicators

6.1 Front Panel

The interface board has 5 bicolor (red/green) LEDs that are visible through the
ASD's front cover (labeled 2.1 through 2.5).
Interface Status
EIP Module Status /
Reserved
EIP Network Status /
Profinet Cnxn Status
Ethernet Activity
Heartbeat
Interface Status: Normally solid
green during operation. If a fatal error
occurs, this LED will flash a red error
code. The number of sequential blinks
(followed by 3s of OFF time) indicates
the error code.
EIP Module Status / Reserved:
When the multi-protocol firmware
image (with EtherNet/IP support) is
loaded, this LED conforms to the
prescribed "module status LED"
behavior as dictated in the
EtherNet/IP specification, Volume 2,
Chapter 9. When the Profinet IO
firmware image is loaded, this LED is
reserved, and therefore always OFF.
2.1
2.2
2.3
2.4
2.5
17