External Audio Sources; Pre-Amplifier / Subout - Blaupunkt Hamburg CD70 Operating Instructions Manual

Instead of the CD-changer, you can connect
an external audio source with line output.
Such sources might be a portable CD player,
a MiniDisc player or an MP3 player.
The AUX input must be switched on in the
menu.
You need an adapter cable to connect an ex-
ternal audio source. You can obtain such a
cable from your Blaupunkt dealer.
Press the MENU button, 8.
button, 7, as often as is
Press the
necessary for "AUX OFF" or "AUX ON"
to appear in the display.
If "AUX ON" is displayed, the input has al-
ready been switched on.
Press the or
to switch AUX on or off.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
Note:
If the AUX input is switched on it can be se-
lected with the CDC button, =.
buttons, 7, in order
You can use the connections provided on your
car radio to connect an external pre-amplifier
and a subwoofer.
We recommend that you use matching prod-
ucts from the Blaupunkt or Velocity ranges.
To prevent speakers from crackling when you
switch on the player, you can set a switch-on
delay for all amplifiers connected to the Pre-
amp Out connection. The maximum delay is
four seconds.
Press the MENU button, 8.
Press the or
as is necessary for "AMP DLAY" to ap-
pear in the display.
Press the or
to adjust the switch-on delay.
"DLAY OFF" means that there is no switch-
on delay, while "DELAY 1" to "DELAY 4" indi-
cate the delay time in seconds.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
button, 7, as often
buttons, 7, in order
27