Toshiba TE2300 User Manual page 83

The Keyboard
Instant security: Press Fn + F1 to lock the keyboard and blank the
screen to prevent others from accessing your data. To restore the screen
and original settings, press any key or move the AccuPoint II. When a
dialog box appears, enter the screensaver password and click OK. If no
password is set, the screen will be restored when you press any key.
Power save mode: Pressing Fn + F2 changes the power save mode.
If you press Fn + F2, the Power Save Mode is displayed in a dialog box.
Continue holding down Fn and press F2 again to change the setting. You
can also change this setting through the Plugged in or Running on
batteries item of the Power Saver Properties window in Power Saver.
Standby: When you press Fn + F3, the computer can enter Standby. To
avoid entering Standby unexpectedly, a dialog box appears for
verification. However, if you check the checkbox in the dialog box, it will
not appear from the next time.
Hibernation: When you press Fn + F4, the computer can enter
Hibernation. To avoid entering Hibernation unexpectedly, a dialog box
appears for verification. However, if you check the checkbox in the dialog
box, it will not appear from the next time.
Display selection: Press Fn + F5 to change the active display device.
When you press these hot keys a dialog box appears. Only selectable
devices will be displayed. Hold down Fn and press F5 again to change
the device. When you release Fn and F5, the selected device will change.
If you hold down the keys for three seconds the selection will return to
LCD.
TOSHIBA TE2300 5-4