Toshiba TE2300 User Manual page 105

Pointing Devices
Pointing Devices
This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected
Simultaneous
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
LCD+AnalogRGB
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically
Switchable
Always High
Always Low
TOSHIBA TE2300
If a PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint II is disabled.
Otherwise, the AccuPoint II is enabled. (Default)
Enables both the AccuPoint II and a PS/2
mouse.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external
monitor for simultaneous display.
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary. (Default)
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
HW Setup and Passwords
7-4