Removing A Memory Module - Toshiba Satellite Pro 4600 Series User Manual

112
Expansion Options
Installing additional memory (optional)
6 Gently press the free edge of the memory module into the slot
until the latches snap, holding the memory module in place.
Seating the memory module
7 Replace the expansion memory slot cover and secure it with
the screws you removed earlier
8 Turn the computer over and reconnect any cables you
removed.
When you turn on the computer, it automatically recognizes
the additional memory. If the computer does not recognize the
memory, shut down the computer, remove the memory slot
cover and make sure the memory modules are seated
properly, as described in step 6.

Removing a memory module

The memory module is accessed from the underside of the
computer. You need a standard Phillips no. 1 screwdriver to
remove the expansion memory slot cover.
To remove a memory module:
1 Shut down the operating system, close the display panel and
remove any cables.
2 Turn the computer over and locate the expansion memory slot
cover. If you need help, see Underside on page 33.