Toshiba Satellite Pro 4600 Series User Manual page 208

208
If Something Goes Wrong
Resolving a hardware conflict
Hot swapping (removing one PC Card and inserting another
without turning the computer off) fails.
Follow this procedure before you remove a PC Card:
1 Click the PC Card icon on the taskbar.
2 Click Stop xxxx, where xxxx is the identifier for your PC
Card.
Windows 98 Second Edition displays a message that you may
safely remove the card.
3 Remove the card from the slot.
The system does not recognize your PC Card or PCMCIA
socket controller.
This problem may be caused by a low main battery. Charge the
main battery fully:
1 Make sure the computer is not in Standby mode.
2 Turn off the computer.
3 Connect the AC adapter and power cable.
4 Keep the computer plugged in for about three hours with the
power turned off.
The problem may also be caused by a conflict with any additional
memory in your system.
Removing a malfunctioning card, inserting it again, and
reinstalling it using the procedure in
can correct many problems.
A PC Card error occurs.
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the
connection is secure.
Using PC Cards on page 126