Cleaning And Maintenance - 3M PELTOR WS LiteCom Pro III Series Manual

4.6 Two-Way Radio Communication
Select the appropriate two-way radio channel using the
menu. To transmit a two-way radio message, press and hold
the Push-To-Talk (PTT) button. If VOX is activated, speak into
the microphone to transmit.
SMART TIP: Your dealer can set the time for maximum
transmission time.
SMART TIP: Double press on the PTT button to activate or
deactivate VOX.
To maintain noise cancelling performance, the speech
microphone should be positioned very close to your mouth
(less than 3 mm or 1/8 inch).
4.7 Bluetooth Wireless Communication
®
4.7.1 Pairing a Bluetooth
When the headset is powered on, press and hold the BT
button on the left cup for two seconds to enter pairing mode
when no device is paired. A voice message will confirm
"Bluetooth pairing on".
®
Make sure that Bluetooth
device. Scan for devices and
Headset". A voice message will confirm when the pairing is
complete "Pairing complete".
The headset can be paired to 2 Bluetooth
be connected to two devices at the same time
NOTE: By default, the radio VOX functionality is disabled
when taking a phone call via a Bluetooth
the call has ended VOX is automatically back on. To transmit
on the two-way radio during phone call, press the PTT button.
If the PTT button is pressed during a phone call, your voice
will only transmit through the two-way radio and not to the
phone call. To activate VOX during a phone call, double press
the PTT button. Your voice will then be transmitted to both the
two-way radio and the phone call.
device
®
is activated on your Bluetooth
®
select "WS LiteCom Pro III
devices, and can
®
connection. Once
®
4.7.2 Operating your Bluetooth
NOTE: The latest paired Bluetooth
operate via the Headset.
Bluetooth
®
Scenario
If Bluetooth
®
device is
connected but
no activity
If Bluetooth
®
device is
connected and
receiving an
incoming call
If Bluetooth
®
device is con-
nected, and has
an ongoing call
SMART TIP: You can also stream music from your Bluetooth
device.
®
If Bluetooth
®
device is
connected, and
streaming is
ongoing
4.8 Communicate via connected external radio
Connect your external communication radio via the auxiliary
port (cable not included). To transmit, use the PTT button on
the radio or external PTT adapter.
4.9 Communicate face to face (push-to-listen)
The surround microphones can be activated from off or low
state with a double press on On/Off/Mode button.
Press any other button to deactivate push-to-listen.

5. CLEANING AND MAINTENANCE

Use a cloth wetted with soap and warm water to clean the
cups, headband and cushions.
NOTE: Do NOT immerse the hearing protector in water.
If the hearing protector gets wet from rain or sweat, turn the
earmuffs outwards, remove the cushions and foam liners,
and allow to dry before reassembly. See Spare Parts Section
below. Keep the earmuffs clean and dry and store recom-
mended storage temperature in a clean uncontaminated area
before and after use.
device via the Headset
®
device is the one you
®
Action Feature
(BT button on
the left cup)
Long press Voice dial
Short press Answer call
Long press Reject call
Short press Hang up
Short press Play/Pause
Double short Next track
press
Triple short press Previous track
Long press Voice dial
GB
®