Table of Contents
Advertisement
xp CDR820/00 eng.-1
30-08-2001 11:18
External recording
Recording with automatic start
Recording with automatic start from an external
source
Note: External recording is only possible at normal speed (1x).
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2
Press AUX repeatedly to select the input for the external
source you want to record from.
is displayed if the digital coaxial input
(DIGITAL IN) is selected.
is displayed if the digital optical input
(OPTICAL IN) is selected.
is displayed if the analog input (ANALOG
IN) is selected.
3
Press RECORD on the set to enter into the recording
menu.
Rotate the ¡ EASY JOG ™ control to select either:
4
: for recording with synchronised start of an
entire disc.
: for recording with synchronised start of
a single track.
5
Press YES to confirm your selection.
6
Start playback on the external source you wish to record
from.
Recording starts simultaneously.
shown and the actual recording time left starts to count
down.
Note: If you start playback on the selected source within a
track, recording starts at the beginning of the next track or
after 2.7 seconds of silence for analog sources.
7
If a digital source is selected:
After the recording process, the CD recorder stops
automatically.
Note: Recordings from DAT or DCC will automatically stop
after 20 seconds silence.
If an analog source is selected:
After the recording process, the CD recorder stops after a
silence of 20 seconds on the source material.
To stop manually, press STOP 9 on the set.
0
RECORD IN PROGRESS
Do not forget to finalize!
22
Pagina 22
is displayed.
RECORD IN PROGRESS
goes off.
Manual recording
Manual recording from an external source
This feature enables you to manually start and stop a
recording from any external source.You can use manual
recording for recording live music, or for particular music
like classical music which cannot be recorded with
automatic start.
1
Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2
Press AUX repeatedly to select the input for the external
source you want to record from.
is displayed if the digital coaxial input
(DIGITAL IN) is selected.
is displayed if the digital optical input
(OPTICAL IN) is selected.
is displayed if the analog input (ANALOG
IN) is selected.
3
Press RECORD on the set to enter the recording menu.
Rotate the ¡ EASY JOG ™ control to select the record
4
type.
5
Press YES to confirm your selection.
is displayed.
is displayed, followed by
remaining recording time of the CDR(W).
Both messages will be swapped continuously.
is
6
Start playback on the external source in order to set the
optimal recording level on the CD recorder (see "Adjusting
the Record Level").
7
Stop playback on the external source.
8
Go to the beginning of the desired track.
9
Press YES and simultaneously start playback on the external
source.
Recording starts.
the actual recording time left starts to count down.
Note: If
connection.
10 To stop recording, press STOP 9 on the set.
is displayed and
off.
Do not forget to finalize!
: for manual start of recording
and the
is shown and
RECORD IN PROGRESS
is flashing, check the digital
RECORD IN PROGRESS
goes
Advertisement
Table of Contents
