Sample Configuration - Siemens SINUMERIK 840D sl Commissioning Manual

PLC commissioning
5.3 Extending the SIMATIC S7 project (PROFINET)
5.3.2

Sample configuration

Configuration via PROFINET
The SINAMICS S120 drives communicate via PROFINET interfaces X150 P1 and X150 P2
with the NCU. The drives assigned to the SINAMICS CU3x0-2 can be operated NC-controlled
or PLC-controlled. Mixed operation is also permitted. Requirement is that the drives are
connected via PROFINET, with an additional switch between X120 and X150 of the NCU.
● CU310-2 PN
● CU320-2 PN (also with Communication Board CBE20)
● CU320-2 DP with Communication Board CBE20
● Scalance X208 (recommended)
72
CNC Commissioning: NC, PLC, Drive
Commissioning Manual, 12/2019, A5E48312804B AA