Henny Penny FlexFusion ELECTRIC SPACESAVER PLUS FSE-610 Installation Manual page 37

Prerequisite The waste water line complies with the specifications (see "Unit and
connection data")
1. Connect the discharge funnel with waste trap to the sewer system.
2. Connect the waste water line to the unit and extend it to the
discharge funnel.
3. Secure waste water line with pipe clamps.
4. Install outlet of the waste water line 20 mm ( 0,8 in) above the discharge
funnel.
5. Fill the discharge funnel with tap water.
6. Fill out the Start-up operation report.
Installation instructions
Connecting the unit
37