Setting The Language; Measuring The Water Hardness - Saeco 10002928 Operating And Maintenance Manual

INSTALLATION
6

SETTING THE LANGUAGE

When the machine is switched on for the fi rst time, it requires the selection of the desired language.
This allows you to adjust the parameters of the beverages to the typical parameters of the country
where the machine is used. This is why some languages are differentiated also by country.
1
2.1 language
English
Select the desired language by
navigating the click wheel with
your fi nger.
4
warming up
-
Wait until the machine completes
the warming phase.

MEASURING THE WATER HARDNESS

The water hardness test strip is for one-time-use only.
1
Immerse the water hardness test strip
in water for 1 second.
2
2.1
When the desired language is
displayed, press
5
rinse cycle
+ please wait
Once the warming phase is
completed, a small quantity of water
is dispensed. Wait for this rinsing to
be completed automatically. Refer
to page 19 to enable/disable the
rinsing function.
2
Check the water hardness value and set:
- the machine water hardness level (page 19);
- the Intenza Aroma system (page 7).
language
English
.
Intenza Aroma System
A
1 2
Machine water hardness setting
3
self-diagnosis
The machine starts and displays
all the messages in the selected
language.
6
medium aroma
espresso coffee 08:33
The screen for beverage
dispensing appears on the
display.
C
B
3 4