Saeco 10002928 Operating And Maintenance Manual page 20

1
Check that the water tank and
coffee bean hopper are full; place
the cup under the dispensing head.
4
1.1 espresso coffee
1.
2.
Select the beverage to program.
Press the button to confi rm.
6
-
espresso coffee
1.
2.
Change the coffee quantity by
navigating the click wheel with your
fi nger; confi rm with
9
prebrewing: normal
espresso coffee
Press the button to select the
prebrew setting.
2
espresso coffee
Press the
When the settings are
changed, the message on the
display starts fl ashing.
When the changes are saved
the message stops fl ashing.
7
temperature: medium
+
Press the
than two seconds to access the
. other programmable settings.
10
prebrewing: normal
Change the prebrew value (normal, long, off) by turning the
click wheel with your fi nger. Press the
Press the
strong aroma
08:33
button.
espresso coffee
button for more
espresso coffee
1.
2.
button to exit.
3
1 beverage settings
Select "beverage settings". Press
the button to confi rm.
5
medium aroma
espresso coffee
2.
1.
Press the button a few times
to adjust the quantity of coffee to be
ground or select the use of pre-
ground coffee. Press the
button to save.
8
temperature: medium
espresso coffee
1.
2.
Change the temperature setting
(high, medium, low) by navigating
the click wheel with your fi nger.
Press the button to save.
Prebrewing: the grounds are
slightly dampened before
brewing to bring out the full
aroma of the coffee and
enhance the fl avor.
button to save.
17