Barco DP K-32B Series User And Installation Manual page 80

Input & communication
LEDs and ports on the Integrated Cinema Processor
Image 6-3
1 ICP is powered.
2 ICP software state, normal operation is green
blinking.
3 ICP operating system state, normally full green .
4 ICP FMT configuration state, normally full green.
5 ICP MAIN configuration state, normally full
green.
LED diagnostic
State description
Software state (LED reference 2)
Operating System state (LED
reference 3)
FMT FPGA state (LED reference 4) green
ICP FPGA state (LED reference 5) green
ICP functions:
• Stores all projector files. When board is replaced; clone package must be reloaded.
• Stores and generates test patterns.
• Scaling to native resolution, re-sizing, masking, line-insertion de-interlacing, subtitle overlay, color space
conversion, de-gamma, color correction
• Source Selection between alternative content and cinema content.
• Stores a Certificate and Private Key needed for Playback validation
• Contains a real time clock, which must be synchronized with the GMT/UTC time stored in the link decryptor
module or Integrated Media Block (see Communicator software)
• Handles unpacking of special video formats
The ICP board spare part kit is not default programmed for a DPxK-32B projector. When using this
board in a DPxK-32B projector the software must be re-installed after installation of the board.
When installing a new ICP board in a DPxK-32B projector the Spatial Color Calibration file must be
reloaded and activated.
CAUTION: Make sure not to short circuit the battery on the board. That will destroy the board
completely !
80 R5905754 /13 DPxK-32B
1 2 4
3 5
ICP SW OS FMT
POWER STAT STAT STAT
Normal operation
flashing green
green
6 7 8
USB
OUT
ICP ALT
STAT CINEMA CONT
6 CINEMA port selected. When on, LED 7 will be
out.
7 ALTERNATIVE port selection. When on, LED 6
will be out. (note that this function is disabled.
Led never lights up)
8 USB, for future use.
9 USB, for future use.
9
USB
IN
Error state
red or orange
off, red or yellow
red : unable to configure the FPGA
yellow : FPGA is loaded with the
Boot application
red : unable to configure the FPGA
yellow : FPGA is loaded with the
Boot application