Replacing A Front Turn Signal; Light Bulb Or An Auxiliary Light; Bulb - Yamaha Fino Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Remove cowling A. (See page
7-7.)
ZAUU0762
1. Cowling A
2. Remove the headlight bulb holder
by pushing it inward and turning it
counterclockwise, and then re-
move the burnt out bulb.
3. Place a new bulb into position, and
7
then secure it with the bulb holder.
ZAUU0096
1. Headlight bulb holder
NOTICE
_
If a headlight bulb of different watt-
age than recommended is used, it
may cause the battery to discharge
or affect the headlight lighting.
_
4. Install the cowling.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
7-29
ECAU0070

Replacing a front turn signal

light bulb or an auxiliary light

bulb

If a front turn signal light or an auxiliary
light bulb burns out, replace it as fol-
lows.
1. Remove cowling A. (See page
7-7.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
ZAUU0097
1. Front turn signal light bulb socket
2. Auxiliary light bulb socket
3. Remove the burnt out bulb by pull-
ing it out.
EAUU0940