Yamaha Fino Owner's Manual page 51

ZAUU0069
1. V-belt case air filter cover
✕
2. Bolt ( 2)
3. Clamp
3. Remove the V-belt air filter case
cover by removing the bolts.
ZAUU0070
1. V-belt case air filter inner cover
✕
2. Bolt ( 4)
4. Remove the V-belt case air filter
element by pulling it out.
PERIODIC MAINTENANCE AND ADJUSTMENT
ZAUU0071
1. V-belt air filter element
5. Clean the element with solvent,
and then squeeze the remaining
solvent out.
6. Check the element for damage
and replace it if necessary.
7. Apply oil of the recommended type
to the entire surface of the ele-
ment, and then squeeze the ex-
cess oil out. WARNING! Use only
a dedicated parts cleaning sol-
vent. To avoid the risk of fire or
explosion, do not use gasoline
or solvents with a low flash
point. NOTICE: To avoid
[EWA10431]
damaging the air filter element,
handle it gently and carefully,
and do not twist it.
[ECA10521]
7-14
ZAUU0072
TIP
_
The element should be wet but not
dripping.
_
Recommended oil:
Yamaha foam air filter oil or other
quality foam air filter oil
8. Install the element into the filter
case.
9. Place the air filter case cover in its
original position, and then install
the bolts and tighten the screw
clamp. NOTICE: Make sure that
each filter element is properly
seated in its case. The engine
should never be operated with-
out the filter elements installed,
7