Replacing The Fuse; Replacing A Headlight Bulb - Yamaha Fino Owner's Manual

Replacing the fuse

ZAUU0093
1. Battery band
2. Battery cover
3. Spare fuse
The fuse holder is located under the
seat. (See page 4-9.)
If the fuse is blown, replace it as fol-
lows.
1. Turn the key to "OFF" and turn off
all electrical circuits.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23482
ZAUU0094
1. Fuse
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuse:
10.0 A
3. Turn the key to "ON" and turn on
the electrical circuits to check if the
devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
7-28

Replacing a headlight bulb

If a headlight bulb burns out, replace it
as follows.
NOTICE
_
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
[EWA15131]
1. Do not touch the glass part of the bulb.
EAUU0930
ECA10660
7