Tape Duplication - Philips VR1100/02X User Manual

A
DVANCED

Tape Duplication

Connection
Diagram
Recorder Your VCR
OUT
S
SORTIE
IN/OUT
AUDIO ENTRE/SORTIE
L AV1 (L-1)
AUDIO
OUT
IN/DECODER
R
ENTRE/SORTIE
PAUSE AV2 (L-1)
TELEC.
LP30713-006
LP20914-005
21-pin SCART
Cable
Player
Another VCR
Dubbing from any VCR (or video
camera) to another is simple.
Explanations on this page uses this
VCR as the recording VCR.
Refer also to the manual supplied with
the other VCR (for playback).
Note:
When this VCR is using the
recording VCR,
You can also use S-Video or Video/
Audio input jacks on the front panel if
another VCR has S-Video or Video/
Audio output jacks.
When this VCR is using the playing
VCR,
You can use the following connector or
jacks.
• AV1 (L-1) IN/OUT connector (rear
panel): if another VCR has scart
input connector.
Be sure to set the A/V1 OUTPUT to
the appropriate mode on the
"OUTPUT/INPUT SET UP" screen.
( P.27)
• S-Video/Audio output jacks (rear
panel): if another VCR has S-Video/
Audio input jacks.
O
PERATIONS
1 Connect the recording VCR (this VCR) and the playing
VCR.
2 Connect the recording VCR (this VCR) to the TV.
TV Receiver
ANT. IN
ANTENNE
ENTREE
RF OUT
ANTENNE
SORTIE
RF Cable
VIDEO
CHANNEL
or AV
mode
1
At VCRs
Insert a source tape in the playing VCR
and a blank tape in the recording VCR.
2
At TV
Tune the channel on the TV to your
video channel or external line input.
3
Select Line Input
Press Number button "0" and/or
PROGRAMME 5/∞ (or CH 5/∞ on
the remote control) to select the line
input.
• L-1: For rear panel AV1 (L-1) IN/
OUT connector.
• L-2: For rear panel AV2 (L-2) IN/
DECODER connector.
• S-1: For front panel S-Video/Audio
input jacks.
• L-F: For front panel Video/Audio
input jacks.
If you are using a rear panel AV1 (L-1)
IN/OUT or AV2 (L-2) IN/DECODER
connector, be sure to set the "A/V1
INPUT" or "A/V2 SELECT" and
"A/V2 INPUT" on the OUTPUT/
INPUT SET UP screen to appropriate
mode. ( P.27)
(C
TV Recorder
S-Video Cable
— 33 —
)
ONTINUED
Recorder Your VCR
OUT
S
SORTIE
IN/OUT
AUDIO
ENTRE/SORTIE
L AV1 (L-1)
AUDIO
OUT
IN/DECODER
R
ENTRE/SORTIE
PAUSE
AV2 (L-1)
TELEC.
LP30713-006
LP20914-005
21-pin SCART
Cable
Player
Another VCR
4
Select Tape Speed
Press ALT/SPEED, until the desired
tape speed (SP or LP) appears on the
display.
5
Play Back Tape
Press the PLAY 3 button on the
Playing VCR.
6
Record (Copy) Tape
Press REC/OTR ¶ at this VCR.
Remember: Press the buttons in step 5
and 6 simultaneously to avoid missing
any of the recording.
ANT. IN
ANTENNE
ENTREE
RF OUT
ANTENNE
SORTIE