Philips VR1100/02X User Manual page 31

To check, edit or erase the
programmes
1 Press VCR.
2 Turn on the VCR and TV.
3 Press TIMER.
4 Press 5 or ∞ to select
"PROGRAM REVIEW" then press
or OK/STATUS. The list of the
timer recording programmes appears.
PR CH START STOP
1 12 08:00 10:00 15/06
2 10 10:00 10:45 14/08
3 45 03:00 03:15 D15/10
4 24 11:30 13:00 DAILY
5 20 20:00 21:00 W18/10
6
7
8
NEXT : OK
END : TIMER
5 Press OK/STATUS repeatedly to
view the more detailed programme
information.
ONE TIME PROGRAM
PROGRAM 1
TV PROG +/- 12
START+/- 08:00
STOP +/- 10:00
REC SPEED SP
VPS/PDC ON
DATE +/- 15/06/00
THURSDAY
ERASE : CLEAR END : TIMER
PREV : 3
NEXT : OK
• When you press the button for the first
time, the detailed programme
information for Programme 1 appears.
By pressing this button repeatedly, you
can review the detailed information of
all other programmes.
• The display panel shows the pro-
gramme start time. Pressing DISPLAY
changes the display to the programme
stop time, then the date and the
channel position.
6 If you want to change the
programme setting shown on the TV
screen, press the following buttons:
START +/– : Changes the start time.
STOP +/– : Changes the stop time.
SPEED
: Changes the tape speed.
VPS/PDC : Changes the setting of
the video programme
system.
DATE +/– : Changes the date.
CH 5/∞
: Changes the channel.
If you want to erase the
programme setting shown on the
TV screen, press CLEAR. The
detailed information of the next
programme appears.
7 Press TIMER to exit from the menu
operations, if necessary.
How to see the programme list
1 2 3 4
PR CH
1
2
3
DATE
4
5
6
7
8
NEXT : OK
END : TIMER
1 Programme numbers
2 Channel position numbers
3 Start time
4 Stop time
5 Start date
• If the programme has worked
once for the Daily recording,
"DAILY" will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the following week's date will be
shown instead of the start date.
5
START STOP DATE
12 08:00 10:00 15/06
10 10:00 10:45 14/08
45 03:00 03:15 D15/10
24 11:30 13:00 DAILY
20 20:00 21:00 W18/
— 32 —
VPS/PDC Recording
Now available from some TV stations, PDC
(Programme Delivery Control) and VPS (Video
Programmes System) are services designed to
assure safe, accurate timer recording. With this
system, special code signals are transmitted
together with the audio/video signals. These code
signals control your video recorder and have
precedence over the advertised times you may
have preset into the timer. This means that your
recorder will start and stop recording when the
preset TV programmes actually start and end –
even if the broadcast time of a preset TV
programme is changed.
NOTES:
• When you use Timer Programming, set the
start time (VPS or PDC time) exactly as
advertised in the TV listing. A different time
than advertised will result in no recording.
• VPS/PDC recording is also possible when a
satellite tuner or a cable system is connected
to AV2 (L-2) IN/DECODER on your recorder.
• VPS/PDC recording is also possible via the
AV1 (L-1) IN/OUT connector.
How to check if the station being received
transmits a VPS/PDC signal
1 Press OK/STATUS or DISPLAY until the
channel position appears on the display panel.
2 Hold down SKIP SEARCH for about 5
seconds.
• "VPS/PDC" appears blinking on the display
panel. If a VPS/PDC signal is detected from
the station, "VPS/PDC" will stop blinking.
If no VPS/PDC signal is detected from the
station, "VPS/PDC" will blink at a slower
rate.
3 Press OK/STATUS, DISPLAY or SKIP
SEARCH again to return to normal display.