Philips VR1100/02X User Manual page 12

S
ETTING
Notes:
¶ Auto channel set function takes place first; it assigns automatically all receivable stations in your area.
¶ Auto clock set function sets the clock automatically by reading the clock setting data from a station transmitting a
PDC signal while auto channel set is being performed.
¶ During auto channel set, the VCR recognizes each station name of the detected stations and stores them in the VCR's
memory, then automatically sets S
the broadcast area.
¶ In the area where to TV station transmits a PDC signal, the VCR can perform neither auto clock set nor auto Guide
Channel number set.
¶ For RF connection users: The VCR detects the channels which are not occupied by local stations and selects one
channel automatically for your Video Channel that is located in the middle of more than 5 vacant channels.
¶ If there is a power cut, or if you press STANDBY/ON, POWER or MENU while Auto Set Up is in progress, Auto Set
Up will be interrupted; be sure to turn off the VCR power once and try again from step 1.
¶ Auto clock may not function properly depending on the reception condition.
IMPORTANT
7 In certain reception conditions, station names may not be stored correctly, and auto Guide Channel Number Set may
not work properly. If the Guide Channel numbers are not set properly, when you timer-record a TV programme using
the S V system, the VCR will record a TV programme of a different station. When programming the timer
HOW IEW
using the S V system, be sure to check whether the channel position on which your VCR receives the
HOW IEW
broadcasting station you wish to record is selected. ( P.29)
7 Your VCR memorizes all detected stations even if reception of some of them is poor. In these cases picture quality
may be poor. To delete those stations with an unacceptable picture, see page 18.
7 For RF connection users: In certain reception conditions, the Video Channel may not be set correctly and interference
may appear in the TV picture while the VCR's power is on. Set your Video Channel manually. ( P.15)
INFORMATION
7 Language for the on-screen display
Language for the on-screen display is automatically set depending on the Country setting you have made in
preparation on page 10 (unless you have selected BELGIUM or SUISSE), as shown below.
= SUOMI
SUOMI
= ENGLISH
PORTUGAL
DEUTSCHLAND = DEUTSCH
= ENGLISH
POLSKA
= NORSK
NORGE
= SVENSKA
SVERIGE
If you want to change the language setting manually, see page 16.
7 Just Clock
Your VCR is equipped with the Just Clock function which provides accurate time keeping through automatic
adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function,
simply set it to "ON", on the Clock Set screen. ( P.20)
U
P
(C
ONTINUED
V system's assigned Guide Channel number for those stations according to
HOW IEW
= DANSK
DANMARK
= DEUTSCH
OESTERREICH
ESKÁ REPUBLIKA = ENGLISH
= ITALIANO
ITALIA
= ENGLISH
MAGYARORSZÁG
= CASTELLANO
ESPAÑA
— 13 —
)
NEDERLAND
GREECE
OTHER WESTERN EUROPE = ENGLISH
OTHER EASTERN EUROPE = ENGLISH
= NEDERLANDS
= ENGLISH