Philips VR1010/75 User Manual page 26

To check, edit or erase the
programmes
1 Turn on the VCR
PR CH START STOP DATE
1 12 08:00P 10:00
and TV.
2 10 10:00A 10:45
3 45 03:00P 03:15 D15/10
4 25 11:30A
2 Press VCR.
5 20 08:00P 09:00 W18/10
6
3 Press TIMER.
7
5
8
4 Press PLAY or NEXT: OK
∞
STOP to select "PROGRAM
REVIEW" then press OK/STATUS.
The list of the timer recording
programmes appears.
5 Press OK/STATUS repeatedly to
view the more detailed programme
information.
ONE TIME PROGRAM
• When you press PROGRAM
CHANNEL+/–
START +/–
the button for the
STOP +/–
REC SPEED SP
first time, the
DATE +/–
detailed program-
ERASE: CLEAR
NEXT: OK PREV: END: TIMER
me information for
Programme 1 appears. By pressing this
button repeatedly, you can review the
detailed information of all other
programmes.
6 If you want to change the
programme setting shown on the
TV screen, press the following
buttons:
5 ∞
CH
/ : Changes the channels.
START +/– : Changes the start time.
STOP +/– : Changes the stop time.
SPEED
: Changes the tape speed.
DATE +/– : Changes the date.
If you want to erase the
programme setting shown on the
TV screen, press CLEAR. The
detailed information of the next
programme appears.
7 If necessary, press TIMER to exit
from the menu operations.
Note:
This function does not work for OTR (One
Touch Recording).
vr1010/75
How to see the programme list
1 2 3
PR CH START STOP DATE
1 12 08:00P 10:00
15/06
2 10 10:00A 10:45
MON
3 45 03:00P 03:15 D15/10
4 25 11:30A 1:00
1:00 DAILY
5 20 08:00P 09:00 W18/10
6
7
8
NEXT:OK
END: TIMER
1
Programme numbers
2
Preset channel numbers
3
Start time
"A" stands for "AM," and "P" stands
for "PM."
4
Stop time
5
Start date
1
12
"D" stands for "DAILY," and "W"
08 : 00 PM
10 : 00 PM
stands for "WEEKLY."
15/06/00
THURSDAY
• If the programme has worked
once for the Daily recording,
"DAILY" will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the day of the week (in this
example, "MON") will be shown
instead of the start date.
Note:
• Even if a power failure occurs, the VCR
keeps your timer programs. However, the
clock time and other menu settings are
lost if it lasts for more than 10 minutes.
As a result, when the power is supplied
again to this VCR after the power failure,
set the clock time and turn off the VCR.
Each timer program you have made will
start unless its start time already passes.
— 27 —
27
When two programs overlap
The Program Review
4 5
screen will appear
15/06
with a magenta line
MON
blinking on the newly
DAILY
set timer recording,
while the other overlapped
END:TIMER
programme blinking.
1 Press PLAY
the magenta line among the two
overlapping programs.
2 Press OK/
STATUS to view
the detail
information of the
program you want
to change.
3 Go to step 4 through 8 of " Timer
Recording
program. To cancel any timer
recording, press CLEAR.
• If you do not modify the overlapping
programs, the VCR will record the earlier
program completely. Only the remaining
part of the later program will be recorded.
• If the START time for the two programs
are same, the lower program number will
be recorded.
Useful function for Timer
Recording: Auto Tape Speed
With this function activated, the VCR
can change the tape speed and record
the programme in LP or SLP mode
unless enough tape remains for
recording in SP mode.
1 Press VCR.
2 Press MENU.
3 Press PLAY
"VCR SET UP" then OK/STATUS.
4 Press PLAY
"TIMER REC SPEED."
5 Press FF
Each time you press the button, the
setting changes.
AUTO:
Select this to allow the VCR to
change the tape speed from SP to
LP or SLP when there is not
enough tape length remaining.
MANUAL:
Select this not to allow the VCR to
change the tape speed.
6 Press MENU to exit from the menu
operations.
00.6.29, 4:54 PM
PR CH START STOP DATE
1 12 08:00P 10:00 21/07
2 25 11:00A 01:00 10/08
3 03 09:00P 11:00 FRI
4 45 03:00P 03:15 W15/10
5
6
7
8
SELECT: CONFIRM: OK
5 ∞
or STOP
to move
ONE TIME PROGRAM
PROGRAM 1
CHANNEL+/– 12
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED SP
DATE +/– 21/07/00
FRIDAY
ERASE: CLEAR
CONFIRM: OK END: TIMER
to modify the selected
"
5 ∞
or STOP to select
5 ∞
or STOP
to select
3
.