Philips VR1010/75 User Manual page 2

D
ESCRIPTION OF
Front Panel
1 2 3
VR 1010 6 HEAD HI-FI STEREO
VIDEO CASSETTE RECORDER
POWER
S-VHS ET COLOUR MODE
/
AUDIO
OPEN A/V FRONT CONNECTORS DUBBING
Super
10
1 1 1
OPEN
Super
Open the lid.
1 POWER button
• Turns the VCR on or off.
• Sets the VCR for an unattended
recording (timer recording) after
timer settings are completed. ( P.25,
P.26)
2 S-VHS ET button
Selects S-VHS ET recording mode
when pressed. The lamp (the button
itself) will lit. ( P.19)
3 COLOUR MODE button
Selects the colour mode both for
playback and recording. ( P.12)
4 Cassette compartment
Where a video cassette is inserted.
7 0
5 STOP/EJECT /
Stops the tape when the tape is running.
( P.13)
Press again to eject the cassette when
the tape is not running. ( P.18)
6 Shuttle ring
• Rewinds or fast forwards the tape
when the tape is not running. ( P.20)
• Starts reverse or forward rapid visual
search during playback or still picture
mode. ( P. 13, P.20)
• Changes the setting of a menu item
by turning to the right, or returns to a
previous menu by turning to the left
when using the menus.
vr1010/75
4
MENU
+8
4
SP
0
6 CHANNEL
OK/STATUS
-15 dB
NORM
14 15 16 17 18
1112 13
A/V FRONT CONNECTORS
S-VIDEO
7
7 S-VIDEO input jack
For connecting to the S-Video
output jack on another VCR or a
camcorder. ( P.27)
8 VIDEO input jack
For connecting to the video output jack
on another VCR or a camcorder.
( P.27)
9 AUDIO input jacks
For connecting to the audio output jacks
on another VCR or a camcorder.
( P.27)
10 AUDIO DUBBING button
Replaces the normal audio sound of a
previously recorded tape with a new
soundtrack, using an audio component.
button
( P.28)
11 OK/STATUS button
• Goes to the next item on the VCR
menu. ( P.10)
• Displays the time counter, present
time, channel number, and remaining
tape length. ( P.21)
12 MENU button
Displays the menu.
Press again to exit from the menu
operations. ( P.10)
3
C
ONTROLS
5 6
STOP/EJECT
REC/OTR
PAUSE/STILL PLAY
TURBO
DRIVE
19
VIDEO L AUDIO R
8 9
— 3 —
00.6.29, 4:53 PM
13 Display window
See page 6.
14 IR (infrared) remote sensor
Receives the signal from the (IR)
remote control.
∞ 5
15 CHANNEL / buttons
• Changes the channels on the VCR.
Release at a desired channel.
• Moves the cursor up and down when
using the menus. ( P.10)
• Adjusts the tracking during playback,
still picture and slow motion picture.
( P.20)
¶
16 REC (record)/OTR button
• Starts recording when pressed once.
( P.13)
• Starts a recording for 30 minutes to 6
hours long when pressed more than
once. The shut-off time increases in
30-minute intervals. ( P.21)
8
17 PAUSE/STILL button
• Stops the tape during recording
(pause) or playback (still picture).
( P.13,P.20)
Press again to resume normal
recording.
3
Press PLAY
to resume normal
playback.
• Activates slow motion picture when
pressed for more than 2 seconds
during playback. ( P.20)
3
18 PLAY button
Starts normal playback. ( P.13)
19 Jog dial
Advances or reverses the picture frame
by frame in the still picture mode.
( P.20)