Table of Contents
Advertisement
Graphic Aperture
Select the size of the Graphics Aperture for the AGP
video device. Default is 64 MB. Other options are
32MB, 128MB, and 256MB.
IDE Drives Setup
Select this line to see the IDE Drives Setup menu.
IDE Drive 0
The maximum capacity of Hard Disk Drive is
configured and shown automatically.
Default of IDE Performance is High Performance.
The other option is Compatible. If an IDE device
attached to the system board IDE controller does not
function properly or causes other IDE devices
attached to the same controller do not function
properly, set this field to the Compatible mode.
Default of IDE Read Prefetch is Disabled. The other
option is Enabled. Read Prefetch can improve the
performance of your system. IDE CD-ROM devices
and some operating systems may not work properly
with this feature Enabled.
IDE Drive 1
The component type connected to IDE Drive 1 is
shown here. With the same setting, options of IDE
Performance and IDE Read Prefetch as IDE Drive 0.
Audio Setup
Select this option to configure the Audio feature.
Audio Support
Default is Enabled. The other option is Disabled.
Network Setup
Select this option to configure the Network feature.
PXE Boot Agent
Select whether to load the Preboot Execution
Environment (PXE) Boot Agent to enable startup from
the integrated network device. This option must be
enabled to display the MAC Address for the
16
IBM Desktop System HMM
Advertisement
Table of Contents
