Using Diagnostic Program From Recovery Cd - IBM 2283 Hardware Maintenance Service

Using Diagnostic Program from
Recovery CD
1. Insert the Personal Computer recovery CD into the
CD-ROM drive then restart computer.
2. Press F1 while POST to enter Configuration/Setup
Utility menu. Select and enter Startup Sub-Menu,
set the first priority of boot sequence to CD-ROM.
Save and exit from Configuration/Setup Utility.
3. Reboot the system.
4. IBM Product Recovery program will load. Choose
System utilities in Main menu, then Run
diagnostics. Follow the screen instructions to
operate.
84 IBM Desktop System HMM