Traffic Information; Switching Traffic Information Priority On/Off; Setting The Volume For Traffic Announcements - Blaupunkt BRONX MP75 Operating Instructions Manual

TRAFFIC INFORMATION

Traffic information
Your device is equipped with an RDS-
EON receiver. EON (Enhanced Other
Network) is a feature that involves the
broadcasting of radio station informa-
tion within a broadcasting network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does. Once
the traffic report has been played, the
system will switch back to the pro-
gramme that you were listening to be-
fore.
Switching traffic information
priority on/off
➮
Press the TUNER button = while
in radio mode.
The radio functions menu appears in
the display.
➮
Repeatedly press the softkey 5
assigned to the "TRAFFIC"
display item until the "TRAFFIC
INFO ON" or "TRAFFIC INFO
OFF" setting that you want is
displayed.
Note:
The TA menu is displayed during
●
a traffic announcement.
To interrupt the current traffic an-
nouncement,
➮
press the softkey 5 assigned to
the "TA EXIT" display item.
64
If you want to deactivate priority for traf-
fic announcements in general,
➮
press the softkey 5 assigned to
the "TA OFF" display item.
Note:
You will hear a warning beep:
if you leave the reception area of
●
a traffic information station that
you are currently listening to.
if, while listening to a CD, you
●
leave the reception area of a
traffic information station that the
system is tuned into, and the
subsequent automatic search
cannot find a new traffic
information station.
if you retune the radio from a traf-
●
fic information station to a station
that does not broadcast traffic in-
formation.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Setting the volume for traffic
announcements
➮
Press the MENU button 9.
➮
Press the softkey 5 assigned to
the "VOLUME" display item.
➮
Press the softkey 5 assigned to
the "TRAFFIC" display item.
➮
Set the volume level that you want
using the volume control 2.
➮
Press the joystick OK 8 or the
MENU button 9 to close the
menu.