Case 3: Call Forward Feature_Example 1 - Planet VIP-156 User Manual

Test the scenario:
1. Pick up the telephone set on VIP-157S port 1, and you should be able to hear the dial-tone.
2. Press the keypad: 192*168*0*1**5062# and will be able to connect to the VIP-157S port 2.
3. Then the telephone set in VIP-157S port 2 should ring. Please repeat the same dialing steps on port 2 to
establish the first voice communication from VIP-157S.
 If the IP address of the remote calling party is known, you may directly make calls via its IP
address and end with a "#".
 If the ATAs are installed behind a NAT/firewall/IP sharing device for Peer-to-Peer VoIP
application, please make sure the NAT device supports SIP applications, and suitable
settings should be applied to the NAT device to enable the SIP communications before
making calls
 [VIP-157S] in PLANET ATA series products, to connect to remote ATA, press the keypad
in the following sequence to connect to the remote VIP-157S port 2:
[remote ATA IP address]**5062, for example: 192*168*0*2**5062

Case 3: Call Forward Feature_Example 1

In the following samples, we'll introduce the Call Forward Feature applications.
For this example, there are three VIP-156 registers to IPX-1980 and VIP-156_A has set Call Forward function
to VIP-156_B.
Machine configuration on the VIP-156:
Please log in to VIP-156_A via web browser and browse the Phone Settings menu and select the Call
service config menu. On the setting page, please enable the All Forward function and fill in the Forward
Type and Forward Number of VIP-156_B, then the sample configuration screen is shown below:
Users Manual of VIP-156/156PE/157S
-59-