Planet VIP-156 User Manual page 20

IVR Menu Choice
#113xxx*xxx*xxx*
xxx#
#114xxx*xxx*xxx*
xxx#
#115xxx*xxx*xxx*
xxx#
#190#
#191#
#195#
#198#
0＊
The following keypad commands can be used to display the network settings enabled on ATA via voice
prompt.
IVR Menu Choice
#120#
#121#
#122#
#123#
#124#
Machine Operation
Set Network Mask
Set Gateway IP
Address
Set Primary DNS
Server
Unlock
Lock
Reboot
Factory Reset
To switch PSTN mode
Machine Operation
Check PC IP Address
Check network connection type
Check the Phone Number
Check Network Mask
Check Gateway IP Address
Users Manual of VIP-156/156PE/157S
Parameter(s)
Use the * (star) key
when entering a
decimal point.
Use the * (star) key
when entering a
decimal point.
Use the * (star) key
when entering a
decimal point.
None
None
None
None
None
IVR will announce the current PC-port
IP address of the ATA.
IVR will announce if DHCP is enabled or
disabled.
IVR will announce current enabled VoIP
number.
IVR will announce the current network
mask of the ATA.
IVR will announce the current gateway
IP address of the ATA.
-20-
Notes:
Must set Static IP first.
Must set Static IP first.
Must set Static IP first.
Must unlock the protect
function before setting
up network settings and
ATA function via
keypad.
The system will be
locked and can't set up
network settings via
keypad.
The system will reboot
automatically.
The system will be reset
to factory default value
and reboot
automatically.
VIP-157 only
Notes: