Planet VIP-156 User Manual page 51

Field
CPC Delay
CPC Duration
IP Dialing Format
Send Flash event
Encrypt Type
Encrypt Key
PPPoE Retry Period
DHCP Gateway ARP
Check Period
Syslog Server IP
Address
System Log
PSTN port Country
PSTN Silence
Timeout
PSTN CID forward
Generate Flash
Signal for PSTN
FXS Port Coutry
Flash Hook Time
(Max)
Flash Hook Time
(Min)
Description
When receiving the disconnected signal, machine will cut the voltage
down to 0V after this time.
When starting to cut the voltage down to 0V, machine will continue this
state by this time.
Setting IP dialing format; when [Disable] can't use IP dialing to make a
call.
There are two flash formats: DTMF Event and SIP Info.
There are seven encrypt
WALKERSUN1, WALKERSUN2, CSF1, CSF2, GX, VGX, RC4,
VOS_R, VGCP.
Registered server needs to support this function.
Note
Some encrypt types must enter the Encrypt Key
Registered server needs to support this function.
Note
If PPPoE dial-up connection fails, machine will retry the dial-up motion
after this time.
The period to check the DHCP gateway ARP.
There are seven Syslog types: Call Statistics, General Debug, Call
Statistics + General Debug, SIP Debug, Call Statistics + SIP Debug,
General Debug + SIP Debug and All.
Machine could send the system logs to the specific Syslog Server. It
can input the IP or Domain address
Set up the FXS Port Coutry
Define the maximum silence time for FXO port. After the time, it will
disconnect the line.
It must work with [Phone – General] [Auto Answer] function or
[Phone – Caller Service] [Forward] function. When this function is
enabled, the caller ID from FXO can transfer to other devices.
FXO flash time defines to hold or hang up the phone
Select the FXO port local country
Maximum flash time to detect the call on hold or hang up.
Minimum flash time to detect the call on hold or hang up.
-51-
Users Manual of VIP-156/156PE/157S
formats: Disable, INFINET, AVS,