Figure 10: Connect the ISDN BRI network termination (NT1) to the U interface
Installing ISDN BRI hardware for trunk applications
This section explains how to install ISDN BRI hardware to support ISDN BRI trunk applications.
The system must already be installed and operating according to the instructions in Avaya
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
(NN43021-310) before performing these procedures.
For a successful installation, perform these procedures in the order listed below:
ISDN Basic Rate Interface Installation and Commissioning
Installing ISDN BRI hardware for trunk applications
March 2011
37