Connecting The Isdn Bri Terminals (For Line Applications) - Avaya CS 1000 Series Installation And Commissioning Manual

Configuring ISDN BRI hardware
Figure 21: Connecting the ISDN network terminator to the U interface and to the S/T interface (in
TE mode)

Connecting the ISDN BRI terminals (for line applications)

For line applications, five procedures are required to connect ISDN BRI terminals to the system:
1. Connect system cables to the cross-connect terminal. See
2. Cross-connect the DSLs at the cross-connect terminal. See
64 ISDN Basic Rate Interface Installation and Commissioning
cables to the cross-connect terminal
DSLs at the cross-connect terminal
on page 65.
on page 69.
Connecting system
Cross-connecting the
March 2011