Table of Contents
Advertisement
A 13/32 in. (10 mm) open-end or socket wrench to remove the bracket bolts from the shipping pallet
A box cutter or packing knife to slice open the nylon straps and tape that seal the crate and boxes
The chassis ships in a cardboard box that has a two-layer wooden pallet base with foam cushioning between the layers.
The router chassis is bolted to the pallet base.
The shipper has the option to either ship the front panel separately or to ship along with the chassis. If the front panel
arrives with the chassis, set aside the front panel box until you are ready to verify the contents of the order.
To unpack the chassis (see
Figure 3: Shipping Crate and Accessory Box
1. Move the shipping box to a staging area as close to the installation site as possible. While the chassis is bolted to the
pallet, you can use a forklift or pallet jack to move it. Make sure there is enough space to remove components from
the chassis.
2. Position the shipping box with the arrows pointing up.
Figure
3):
5
Advertisement
Table of Contents
