Omron NP3 Series Introduction Manual page 75

4
4-4 Creating Screens
4
Note
●Function Switches
76
NP Introduction Manual
2.
Move the cursor from the upper-left corner of the workspace to the
opposite corner.
You will see a lamp of the same size as the display.
3.
Set lamp properties.
Item
Read Address
Label
Label Size
Flicker
Foreground Color
* Select [Bold] from the toolbar.
4.
Click .
You will see the lamp of the ON status.
5.
Set lamp properties.
Item
Label
Label Size
Flicker
Foreground Color
* Select [Bold] from the toolbar.
Objects like lamps operate differently when the address is ON or OFF. You must
set their properties to both the ON and OFF statuses. By default, the screen is the
OFF status. Click
Set the function switches.
For details, refer to [01 Waiting]. Setting details are the same.
The [04 Stopped] screen is now complete.
Setting
SERIALA:00000.06
Shutter [line break] Stopped*
48
Yes
(White)RGB(255,255,255)
Setting
Shutter [line break] Stopped*
48
Yes
(White)RGB(255,255,255)
to set the properties to ON.