Omron NP3 Series Introduction Manual page 2

Introduction
Thank you for purchasing an NP-series Programmable Terminal.
NP-series PTs are designed to transfer data and information in FA production sites.
Please be sure that you understand the functions and performance of the PT before attempting to use it.
OMRON products are manufactured for use according to proper procedures by a qualified operator
and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual. Always heed
the information provided with them. Failure to heed precautions can result in injury to people or
damage to property.
Warning
Trademarks
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Other brand and product names are trademarks or registered trademarks of their respective owners.
OMRON, 2007
©
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice. Every precaution has been taken in the preparation
of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any
liability assumed for damages resulting from the use of the information contained in this publication.
Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury. Additionally, there may be severe property damage.
1