Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks; Erasing The Programme - Philips FWM396/78 User Manual

CD/MP3-CD/WMA Operations
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with PROGRAM.
.................. plays the current track
continuously
ALB ......... plays the current album
continuously
ALL ........ repeats the entire disc/
programme
................... tracks of the entire disc are
played in random order
1
To select your play mode, press the MODE
button before or during playback until the display
shows the desired function.
2
Press 2; to start playback if in the STOP
position.
3
To return to normal playback, press the MODE
button until or
● You can also press 9 to cancel your play mode.

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 40 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
"Loading discs").
2
Press DISC (or DISC 1/2/3 on the remote
control) to select a disc.
3
In stop mode, press PROG to start
programming.
➜
starts flashing.
PROG
4
Press S / T (or í / ë on the remote
control) repeatedly to select the desired track.
●
For MP3/WMA disc, press ALBUM/PRESTE -
/+ and S / T (or í / ë on the remote
control) to select the desired album and title for
programming.
5
Press PROG to store the track.
6
To end programming, press 9 once.
➜
stays and the programme mode
PROG
remains active.
7
To start programme play, press 2;.
16
is no longer displayed.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If you attempt to programme more than 40
tracks, "PROGRAM FULL" is displayed.
– During programming, if no button is pressed
within 90 seconds, the system will exit the
programme mode automatically.
To review the programme
●
Stop playback and press S / T (or í /
ë on the remote control) repeatedly.
● To exit review mode, press 9.

Erasing the programme

● Press 9 once when playback is stopped or
twice during playback.
➜
disappears and "PROG CLEAR" is
PROG
displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.